Press "Enter" to skip to content

5 things to consider when mounting your rifle scope

Are you here because you are looking for tips on how to mount your rifle scope? For sure, rifle scope mounting is not rocket science, and you don’t require a degree certificate to do it correctly. Anyone can do it, including amateurs.

However, if you want to do it on your own without someone’s help, there are some things that you have to consider in the process.

Here, we have shared the five things to consider when mounting your rifle scope.

So, let us directly jump into it.

The mounts:

You to mount your rifle scope, you need the mounts themselves. So, this is the number one thing to consider. You should have the right package.

There are a variety of scope guns and mounts that you can get. Even though it is tempting to buy a modest one, especially given the current financial situation, it is worth remembering that quality is an essential factor in choosing the right package to buy.

Fortunately, choosing the proper scope mounts is easy, regardless of whether your rifle is unusual or vintage.

However, in choosing your mounts, you also have to consider a few critical aspects. Does this include: What mounts do you need for your riflescope in terms of ring measurement and height? What kind of rifle scope receiver grooves that you have? At Optics Guides , you could get tremendous discussion about the essential factors in choosing the compatible rifle scope mount.

Typically, you can find that scope and mounting kits are sold together. In these cases, you can be sure that they will be suitable for your rifle scope. However, it would be best if you were sure they are OK for your rifle before proceeding. If not, then you need to consider purchasing a compatible kit.

The right working place:

Yes, you have to consider where you be working from. You need suitable space for mounting your rifle. There are many reasons why you need the right working place. Because you will be working on a weapon, you need a safe space.

So, when you return home with the right package, you should find a decent place to do your job. Choose a location with enough space and lighting. Also, make sure that it is a place that you can place the rifle mount kits down and not face the worries of getting them lost. Stay away from areas where so many people are walking around. Assuming you don’t have your work table, you can use the kitchen table. Just make sure it’s not in use at the moment.

The screws:

The other part that you have to consider when working on that rifle is the screws. After you have opened your package and wiping them with soft tissue such as a rug, you should check if it contains the right set. Many folks forget about this and only remember putting a thin oil coat at the rifle’s underside.

But, to not damage the screws, making sure the Allen key is suitable becomes paramount at this stage.

You should also check the number of screws if there is an excellent chance to be precisely the number given in your package. More so, test each screw by dropping it into the base openings. Check that they fit well and that an equal amount of it is sticking out of the base.

Then, secure your bases to their receiver. Put the rear and front base mounts in the appropriate position on your receiver. Put a bit of Loctite on the strings of your screws before embedding and securing them.

The process will ensure that your mount doesn’t become loose as a result of the recoil effect.

The mounting of Rings:

It would help if you used the right tools to mount the scope rings. To ensure you get through with ease and without damaging anything, you should use a suitable and adequately fitting wrench to remove ring screws. Then place them on your workbench or at any safe place.

Your front ring should be mounted on a rotating dovetail. Wipe a light coating of oil over the “feet” of your front ring before embedding it in the base opening. Use a scope wrench to turn the ring.

Use a screwdriver to loosen those large windage screws at the base of your rear rifle scope. Do this until there is enough to slide into place. Put it in the middle and tighten the screws enough to hold it in place.

Alignment:

You also have to check the alignment before finishing your mounting procedure. Alignment is paramount when it comes to getting your target and while you want your rifle to be accurate, so check it.

Also, for accurate long-range shooting, the alignment should be correct. Though scope alignment might require some technical understanding, the process is that complicated. It is even simple with the use of alignment tools.

To go about it, check the ring arrangements by adjusting and rotating the scope in them. It should spin unreservedly, without any feelings of deterrence or gnawing.

To mount your riflescope, place it in the rings and carefully screw the upper parts onto the lower rings. Find appropriate eye relief by shouldering the rifle and looking through its lenses. Adjust your scope until you have a full field view. If it is not possible for your scope to be out of focus, loosen the focus ring. Adjust it until everything is clear, then secure it. Check that the crosshairs are straight. Adjust the scope until you are satisfied that it is straight, and then you are done!

Conclusion

Mounting your riflescope is something you should know if you want to be a professional sniper. If you are struggling, you can consider the above 5 points to consider when mounting your riflescope, and you will get a positive result. What have been outlined here are the basics of properly assembling your gun and, if you follow them, you can gain confidence in the process.

Enjoy the correctly mounted and accurate rifle scope.

The post 5 things to consider when mounting your rifle scope appeared first on Hunting and Hunting Gear Reviews.


Source: Huntinglife

Be First to Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: